วันอาทิตย์ที่ 31 ตุลาคม พ.ศ. 2553

Crane Adorable 1 Gallon Cool Mist Humidifier (Penguin Shape) #1

Crane Adorable 1 Gallon Cool Mist Humidifier, Penguin ShapeI got the Penguin Humidifier ,Crane Adorable 1 Gallon Cool Mist Humidifier, a week ago after researching various brands, some expensive, filter ones, big, hot ones, etc. And I read the reviews about the leak or break on this one, and that in principle there was a complaint on just about every brand out there - always a few problems. (! And the fact that it is ridiculous cute) So for a cost of $ 30 seemed to cover what I needed: something that was expensive, not too big and bulky, less is more fresh water through it (and less water sitting around getting ookey) and humidity would be where it used to add.

He has been running almost non-stop for weeks, sometimes less filling or when we were out, and it worked perfectly. The body reservoir, even when running on high, has lasted at least 16 hours. I had no problems with white dust on everything loud as my old one huge (I use tap water), and it does not spray water with so much fog. He certainly made a difference running at night in the bedroom - no noses and throats feeling 'dry as dust "in the AM. The Penguin Humidifier has a small footprint, about 9 cm in diameter and 12.75 inches high. It runs almost silently, but it does drip noise and actually sounds like our table fountain. It's a nice sound during the day but wore on me during the night, I did not use the sound and I still think it leaks when it was not. So now I run for a while before going to bed and I sleep much better all around.

Things to watch out for though ... The reservoir opening where you fill cap is a valve spring (similar to what your coffee maker basket). Must be a silicone O-ring that fits in the top of the cap. Our O-ring was in the hole, and it was clear-ish could be easily missed. In the O-ring cap can leak if not properly seated and the cap should be tightened snuggly. When filled and put right (there is even a bit of grip) is limited drip from the valve spring. Check that nothing is hidden spring-valve by pressing in (for filling) and the flap is not folded. Use cold water in the tank, and if you wait for the boiled water at room temperature before use. Using hot water can certainly cause the plastic to crackle and crack. Body should sit square on the 'butt' or it can dribble over the side a bit small.

We have absolutely no problems with this baby, and if I can I will update my work. It's a nice rocker on-off into 'left butt cheek. A dial on the front of it (I call it navel) to miss even at high volume is not depleted to adjust. The mist dial does not seem to affect the fountain noise at all, ie, less misting no it does reduce gurgling. A great little design and it does the job!

ไม่มีความคิดเห็น:

แสดงความคิดเห็น